Forsíða Topp 4000 data
Topp 4000 english Prenta út
Laugardagur, 28. Febrúar 2009 11:36

Topp 4000 seamless epoxy-quarts industrial floor coating

Topp 4000 is a 3-4mm epoxy screed type industrial flooring,
made out of low molecular clear epoxy as a binder and colored silica aggregate.Topp 4000

The product is available in wide range of colors.

Advantages:
» Fine texture - suited for dry and wet area use.
» Mechanically and chemically durable.
» Seamless surface - improves hygiene.
» Attractive - enhances working environment.
» No risk for food taint during application.

Uses:
Topp 4000 has been designed for use as a mechanically and chemically durable screed in light and medium duty manufacturing environment, particularly those using wet process conditions where a fine texture floor is required. Typical areas of use include light industrial plants, vegetable or fruit process industries, beverage industries, pharmaceutical manufacturing areas, food preparation areas and shower rooms.

Description:
Topp 4000 is an applied resin based floor screed designed for use in 3-4mm thickness.

It consists of graded, colored, epoxy coated sand particles bound together with a clear epoxy resin binder.

The full system comprises off the following:
1. Cleaning og the floor with adequate machinery.
2. Topp 4000 solvent free primer.
3. Topp 4000 binder as both screed binder and sealing coat.
4. Topp 4000 aggregates.
5. Topp 4000 finishing coat.

Typical Properties:
The values given for typical properties are average figures achieved in laboratory tests at 20°C. As such, actual values obtained on site may show minor variations from those quoted.

Physical properties:
Topp 4000 physical properties have been tested by independent Lloyd's approved laboratory.

Compressive strength: ASTM C 579 - 135 N/mm2.
Tensile strength: ASTM C 307 - 46 N/mm2.
Flexural strength: ASTM C 580 - 34 N/mm2.
Shore D hardness: ASTM D 2240 - 89 SHORE D.
Pull-off strength: ASTM D 4541 - 5.8 N/mm2.
Absorption: ASTM C 413 - 0.005%
Flame sperad: BS 476 PT-7 - Class 3
Abrasion resistance: ASTM D 4060 CS-17 Wheel - 50 mg max. weight loss, 1000hrs/1000g.

Cure time:
» Foot traffic: 24 hours.
» Vehicle traffic: 48 hours.
» Full chemical load: 7 days.

Application:
Before applying Topp 4000, it is important to consider the following:

1. The concrete floor should have minimum compressive strength of 25 N/mm2.
2. The Concrete humidity should not be over 80% RH.
3. The room temperature should be more than 18°C when applying. Application of Topp 4000 should only be applied by trained specialists.

Golflagnir is a specialized company in this field, has the right equipment and skilled workers which ensure good results.

 
Borði